HistoryFacts.com: In the 1930's, a Skyscraper was Rotated 90 Degrees While Everyone Kept Working Inside
In the 1930s, a skyscraper was rotated 90 degrees while everyone kept working inside. |
Science & Industry |
| |
The move was an impressive feat of engineering. The building’s support columns were lifted from their cast-iron bases at the foundation, and each was put on a temporary steel support. (The elevator shaft was modified to keep the car from going into the now-nonexistent basement.) Eighteen manually operated jacks moved the supports along a series of rollers three-eighths of an inch at a time, and the building traveled roughly 15 inches per hour. Workers had to be careful to move all the columns at the same pace, so they’d follow the lead of the construction foreman, who would blow a whistle to signal that it was time to pull the levers. Engineers kept an eye on the building’s alignment with a plumb bob; if a roller started to shift out of position, they’d simply whack it with a sledgehammer. | |
When it was time for the 90-degree pivot, the crew had to lift the building briefly to adjust the rollers. Steam engines attached to cables helped power this final movement, rotating the structure into place. Ultimately, the building sat within one-sixteenth of an inch of its planned destination. During the move, the 600 employees entered and exited the building from the sidewalk via a moveable bridge. Reportedly, the workers inside the building didn’t even feel the movement. The project made way for a seven-story limestone art deco building, completed in 1932 and now on the National Register of Historic Places. The company continued to add to the campus, and the original building was demolished in 1963 to make room. Note: The above comes directly from their website. |
Comments
Post a Comment